Ledger Nano X stuck in loop before being initialized

So I just unboxed my Nano X direct from Ledger. I started the device and it said download Ledger Live.

So it set it down to go look for my phone. The thing was, I had trouble finding my phone and by the time I did that, the Nano screen seemed to be in some kind of screen saver mode. Still, I downloaded Ledger Live onto my iPhone and turned back to work with the Nano.

However, it seems to be stuck on a menu with 3 options: Close/Exit control center, Battery, Power Off.

The left and right buttons will take me through those three items all day long.

I expected pressing the left and right buttons together would take me someplace useful, but not so. I have held the left and right button together for up to 60 seconds . . . nothing. I have even held both button while looking at each of the three menu items thinking one of them night work. No so. To my surprise, holding both buttons while looking at power off doesn’t power off the device either.

I never got far enough to set a pin yet, so it isn’t asking for one so I cannot enter it three times wrong.

Suggestions?

==== Next Day ====

The next day it seems like the Nano X had started over. I ran through all of the startup messages and eventually got to the point it asked if I wanted to setup as new device. However, when I press and hold both buttons, instead of asking for a PIN it goes to the 3 options mentioned above: Close/Power Off/Battery.

I’ve done this a couple of times now . . . the device has yet to ask me for a PIN or try to give me restore words . . . I have no idea what to try next except returning it to Ledger.

Frank

So I just unboxed my Nano X direct from Ledger. I started the device and it said download Ledger Live.

So it set it down to go look for my phone. The thing was, I had trouble finding my phone and by the time I did that, the Nano screen seemed to be in some kind of screen saver mode. Still, I downloaded Ledger Live onto my iPhone and turned back to work with the Nano.

However, it seems to be stuck on a menu with 3 options: Close/Exit control center, Battery, Power Off.

The left and right buttons will take me through those three items all day long.

I expected pressing the left and right buttons together would take me someplace useful, but not so. I have held the left and right button together for up to 60 seconds . . . nothing. I have even held both button while looking at each of the three menu items thinking one of them night work. No so. To my surprise, holding both buttons while looking at power off doesn’t power off the device either.

I never got far enough to set a pin yet, so it isn’t asking for one so I cannot enter it three times wrong.

Suggestions?

==== Next Day ====

The next day it seems like the Nano X had started over. I ran through all of the startup messages and eventually got to the point it asked if I wanted to setup as new device. However, when I press and hold both buttons, instead of asking for a PIN it goes to the 3 options mentioned above: Close/Power Off/Battery.

I’ve done this a couple of times now . . . the device has yet to ask me for a PIN or try to give me restore words . . . I have no idea what to try next except returning it to Ledger.

Frank